SKF group was founded in 1907 and had more than 105 years history. SKF... 
FAG brand was founded in 1883 and has about 130 years history. This br... 
NSK was founded in 1916 in Japan and concentrate on bearings design, m... 
INA KR40PPA Cam Follower Bearing
INA KR40PPA Cam Follower Bearing
Bearing Type: KR..PPA
Outside Diameter: 40.00mm
Width: 20.00mm
Stud Diameter: 18.00mm
Thread: M18x1.5
KR design cam followers are fitted with a needle roller and cage assembly. They are also available with a full complement needle roller set, which is identified by the designation KRV. The outer ring is axially guided by the pressed-on flange ring and the head of the stud, which also serves as an integral flange.
KR design cam followers without a designation suffix or with the designation suffix B have a narrow gap between the outer ring and the two flanges that serves as a gap-type seal.
KR design cam followers are also available with an axial sliding ring made of polyamide 66 on both sides, identified by the designation suffix PPA or PPSKA. In the radial direction, the sliding ring forms a narrow labyrinth seal with the outer ring to protect against coarse contaminants. In the axial direction, the sliding ring serves as a contact seal to reliably retain grease in the bearing. This improves the lubrication conditions in the bearing, keeps friction and heat low, and extends grease service life.
Standard and Optional*Optional accessories need buy separately.
